1. Your table will have four levellers, one per leg. Place the table on its
side. Remove one of the levellers. Adjust the remaining levellers so that when the STOPROC is fitted and is set to the top position, the table
will rock towards the STOPROC.
2. Fit the STOPROC in place of the leveller that was removed making sure that it is on the left hand side of the leg when facing you and that the rotation is towards you.
3. Insert a matching bolt and washer together with the Stoproc and attach it to where the leveller was removed, tightly secure it in place by holding the bracket against the side wall of the leg.
4. Rotate the STOPROC towards you until it touches the floor, “the roc stops here” Stoproc will hold its position should the table be moved. If it requires adjustment, follow the steps above.